*Handouts:*
gnuplot mini-manual; gnuplot example; printouts of several codes.

*
Your goals for this session (in order of priority; you will
finish some in PS#1b):
*

- Finish (some) leftover tasks from Session 1 (if any)
- Look at a round-off error demonstration with quadratic equations
- Discuss a special-case problem to help understand summing in different orders
- Debug sample codes; make some plots with gnuplot
- Assess different methods of calculating spherical Bessel functions, including with GSL

Please work in pairs and briefly answer questions asked here on this sheet. The instructors will bounce around 1077 and answer questions (don't be shy to ask about anything!).

You should go to your working directory (e.g., for cygwin go to
the shared disk with `cd /cygdrive/z`, see Session 1 for
creating one),
download session02.zip from the 6810 homepage and unzip it
in your directory.

You should finish or correct the following subtasks from Session 1, which we will build on. If you are correcting something, check it with an instructor sometime during the class today.

**Overflows, Underflows, and Machine Precision:**Complete part 2, modifying "precision.cpp" so that the result for double precision is correct (`10e-12`is*incorrect*).**Using a Makefile:**Successfully complete part 3.**Using the GSL Scientific Library:**Complete parts 1, 2, and 3.

This section assumes you have read the background notes for Session 2, which describe round-off errors and the quadratic equation.

- Review the discussion about round-off errors and the quadratic equation in the Session 2 notes with your partner. Make sure you go over the pseudo-code for the test case and understand it.
- Look at the code quadratic_equation_1a.cpp in an editor and/or on the handout. It represents the pseudo-code as it has just been typed in, mistakes and all. Note that it is not indented consistently. One way to fix this is with the "indent" tool. Just type "indent quadratic_equation_1a.cpp" at the command line and then look at the code again. It will have been indented automagically! Isn't that better?
- Now try compiling with "make -f make_quadratic_equation_1a".
You should get a bunch of warnings and errors. Each one comes with
the line number of the error. Take each one in turn
and mark on the handout what you think the error is (you'll need to
identify the line numbers in your editor; ask an instructor if you
don't know how to turn them on).
Each warning is a clue to a mistake in the code
(such as a typo)! [One hint: "setprecision" is defined in the header
file "iomanip".]
If you get stuck, quadratic_equation_1.cpp is the corrected version
(without the "a" after the "1").
*List the errors here:*

- Correct these errors and see that it compiles and runs.
Try a=1, b=2, c=0.1 and see that the roots differ.
*Which two (of*(Hint: check the Session 2 notes.)`x1`,`x1p`,`x2`,`x2p`) are the most accurate? Explain why the others are not as accurate.

- Now look at quadratic_equation_2.cpp, which is the second pass at the code. Check the comments for a description of changes. (This code is printed on the same handout as 1 and 1a.) Mark every C++ line on the printout that you don't understand completely (it may be most of them!).
- Compile and run quadratic_equation_2.cpp, and enter a=1, b=2, c=.1 again. The output is now more detailed and an output file named "quadratic_eq.dat" is created. We'll discuss outputting to a file more later; for now, this is an example you can follow to do it on your own (there were also examples in Session 1).
- Follow the "Plotting Data from a File with Gnuplot" handout
to duplicate the plot on the back. Try some of the extra commands,
including output to a postscript file. Print out the file
on the Smith1077s printer using

`lpr -P //PHYPCS/smith1077s quadratic_eq.ps`in cygwin and

`lpr -P smith1077s quadratic_eq.ps`on Linux, and hand it in at the end (all titles are not necessary here, but will be in the future!). *Is the plot qualitatively and quantitatively consistent with the analysis in the notes? Explain in a few sentences. [Hint: What does a straight line mean? What does the slope tell you?]*

Here we consider another example of subtractive cancellation and how
computer math is not the same as formal math. Imagine we need
to sum the numbers 1/n from n=1 to n=N, where N is a large number.
We're interested in whether it makes any difference whether we sum
this as:

1 + 1/2 + 1/3 + ... + 1/N (summing up)

or as:

1/N + 1/(N-1) + ... + 1/2 + 1 (summing down)

In formal mathematics, of course, the answer are identical, but not
on a computer!

To help think about the sum up vs. sum down problem, it's useful to
think first about a simpler version. Suppose you want to numerically add
10^{7}
small numbers a = 5x10^{-8} to 1 (so the exact answer is 1.5).
For the first three questions, *predict* the answer before running
the code.

*If you add 1 + a + a + ... in single precision, what do you expect to get for the total?*(Hint: recall the discussion of "machine precision.")

*If, instead, you add a + a + ... + 1 in single precision, do you expect a different answer? Which will be closer to the exact answer?*

*If you repeat the exercise in double precision, what do you expect will happen?*

- Write a brief "pseudocode" here for a program that would compare
these two ways of summing.
Then look at the file order_of_summation1a.cpp in an editor
(also on a handout);
*does it look like an implementation of your pseudocode?*

- In a terminal window, use the makefile make_order_of_summation1a to try and compile it ("make -f make_order_of_summation1a"). Identify and fix the errors, until it compiles and runs correctly (verify the results against the comments in the file). Correct your answers to 1,2,3 if necessary (and understand them!).
- Run indent on the file ("indent order_of_summation1a.cpp") and check that it is now nicely formatted.
*Challenge: Predict the results for 10*^{8}additions (instead of 10^{7}):

Now change the code, and see if your prediction is correct (or that you can explain it after the fact).

The next three tasks (Bessel 1-3) build on the discussion of spherical Bessel functions in the Session 2 notes. Skim this discussion before going further.

- Copy make_area to make_bessel and open make_bessel in an editor. (If you are in the session_02 subdirectory, you can use "cp ../session_01/make_area ." to create a new copy where you are or "cp ../session_01/make_area make_bessel" to make a copy directly; do you understand what all the "."'s mean? If not, ask!) Change all "area"'s to "bessel"'s. (Can you do this all in one step with the editor?) Run the makefile using "make -f make_bessel".
- If you run bessel.cpp,
you'll generate a data file "bessel.dat".
By looking at the code (and chapter 3), figure out what the columns
in the file mean.
*What Bessel function is being output? What are the columns?*

- Make a plot of the third column as a function of the first column
using gnuplot. (Use the example in the
handout as a guide. You might also find the "GNUPLOT Manual and
Tutorial" useful.) Try plotting BOTH the second and third columns
vs. the first column on the same plot (i.e., two curves).
*Print out your plot.*

- Modify the output statements in bessel.cpp to increase the number of digits in the output (look back at previous codes for clues how to do this).
- Modify the code bessel.cpp (give it another name)
to compare upward and downward recursion methods by adding
a new column to the output that calculates the
*relative*difference between the results for each x. We'll define the relative difference of a and b as |a-b|/(|a|+|b|). Google to find out how to take an absolute value in C++. - Make an
*appropriate*plot of the error vs. x and interpret the different regions of the graph. Try with and without log scales.

Make sure you have completed the GSL task from Session 1 before doing this.

- Modify bessel.cpp to also calculate the spherical Bessel function
using the GSL routine gsl_sf_bessel_jl for comparison. The GSL
documentation gives the usage of this function as:

Function: double**gsl_sf_bessel_jl**(*int l, double x*)

"This routine computes the regular spherical Bessel function of order l, j_l(x), for l >= 0

and x >= 0."

*How does the accuracy of the downward recursion routine in bessel.cpp compare to that of the GSL function? (How can you tell?)*

furnstahl.1@osu.edu