Configuring the Ports
Back to "Step by Step" |
Navigate to Switch -> Port -> Config.
Select multiple ports as appropriate by using "<Shift> Click" and "<Ctrl> Click".
All ports with connections to VME Controllers should be configured as follows:
STP Mode | Disable |
Admin Mode | Enable |
LACP Mode | Disable |
Physical Mode | 1000 Mps Full Duplex |
Link Trap | Disable |
Maximum Frame Size | 10240 |
Note: The physical mode of ports connected to the VME Controllers can be set to "Auto Negotiate". Previously this was not the case.
Click "Submit".
Go back to step 2 and repeat as needed for other ports.